Welcome to Shenzhen yuhantong Inspection Technology Co., Ltd. (Shenzhen Branch of Quality Inspection Institute)
0755-32986968
0755-32986968
First, introduction to IP level certification
IP level test is aimed at the requirements of dust-proof and water-proof test of products. There is a special test standard IEC / en60529 in the world. The first mark number indicates the protection level of contact protection and foreign objects, and the second mark number indicates the protection level of waterproof. As long as the product needs to prevent solid objects, such as arms, fingers, metal bars, metal wires, and even dust or liquid (water) from entering the product, there is a set of standard test equipment, methods, time and judgment standards. 。 IEC / en60529 standard refers to the degree of protection provided by enclosure (IP code), i.e. the degree of protection provided by the product shell.
IP is the abbreviation of international protection, which means the internationally recognized protection level. Generally speaking, most IEC or en product standards make some modifications to the conditions of IEC / en60529, such as test conditions or test judgment, to meet the requirements of their special products. Products need to be tested for dustproof and water-proof. Most of the conditions for use are in outdoor or humid environment, such as the power supply of lamps, advertisements, air conditioning products, bathroom supplies, washing machines, swimming pool supplies, three warm supplies, bathtub supplies and other products, and even information products increasingly emphasize the function of dustproof and water-proof.
Second, IP level certification mark
IP code 如IP68
Third, IP level authentication technical information
First number Description | Description of protection scope |
0. no protection | |
1. Protect solid foreign bodies with diameter of 50mm and larger | Detector, ball diameter 50mm, should not enter completely |
2. Protect solid foreign bodies with diameter of 12.5mm and larger | Detector, ball diameter 12.5mm, should not enter completely |
3. Protect 2.5mm diameter and larger solid foreign body | Detector, ball diameter 2.5mm, should not enter completely |
4. Protect solid foreign bodies with diameter of 1.0mm and larger | Detector, ball diameter 1.0mm, should not enter completely |
5. Dust protection | It is impossible to completely prevent dust from entering |
However, the amount of dust entering will not cause damage to the equipment | |
6. Dust sealing | Dust shall not enter into the cabinet when the pressure inside is 20 mbar |
Second number Description | Description of protection scope |
0. no protection | |
1. Water drop protection | Water drops falling vertically shall not cause damage |
2. When the cabinet is inclined 15 degrees, protect the water drop | When the cabinet tilts 15 degrees to either side |
Disposal of falling water drops shall not cause loss | |
3. Protect splashed water | Water splashed from both sides of the spring line at an angle of 60 ° shall not cause damage |
4. Protective water spray | Water spray aimed at the cabinet body from each direction shall not cause damage |
5. Protection against water jet | The water jet aimed at the cabinet body from each direction shall not cause damage |
6. Protection against strong water jet | The strong water spray aimed at the cabinet body from each direction shall not cause damage |
7. Protection against short-time immersion | When the cabinet is not immersed in water under standard pressure for a short time |
There should be no water immersion that can cause damage | |
8. Protection against long-term immersion | Can be immersed in water under certain conditions |
There should be no water immersion that can cause damage |
Wechat Service
Wechat